Modern Warfare 2 Forum

Highlighted

PLEASE OPEN MY NAT

Messiah135
Likes: 1
Posts: 2
Registered: ‎03-06-2017
1 ACCEPTED SOLUTION

Accepted Solutions
in reply to Messiah135
Solution

Step 1:

  • Set up a Static IP for your platform (either through your routers DHCP or manually)

Step 2:

  • Enable uPnp on your router (default setting on most routers is enabled).
  • Restart your router and platform. If you achieve Open Nat – job done. If not – continue.

Step 3:

  • Port Forwarding.  At this point disable uPnp.
  • Enter the applicable port forward numbers into your router – assigning them to your platforms Static IP.  Press Apply.
  • Restart your router and platform.

That should do the trick 

ShaqBoZe
Likes: 2
Posts: 31
Registered: ‎03-06-2017
1 REPLY 1
in reply to Messiah135
Solution

Step 1:

  • Set up a Static IP for your platform (either through your routers DHCP or manually)

Step 2:

  • Enable uPnp on your router (default setting on most routers is enabled).
  • Restart your router and platform. If you achieve Open Nat – job done. If not – continue.

Step 3:

  • Port Forwarding.  At this point disable uPnp.
  • Enter the applicable port forward numbers into your router – assigning them to your platforms Static IP.  Press Apply.
  • Restart your router and platform.

That should do the trick 

ShaqBoZe
Likes: 2
Posts: 31
Registered: ‎03-06-2017

Studios